New Brunswick Craft Brewers Association
Brewing => Technique => Topic started by: brynn on December 15, 2013, 09:18:50 PM
-
Anybody have a goof way to get picaroons labels off?
-
I used to let them soak in a pail of water overnight with some vinegar in it... came off pretty easy after that...
-
The glue they use leaves quite a mess on the bottles. I stopped delabeling altogether, as I think it's a waste of time, but I'll still give the water/vinegar tip a try.
-
I have a dozen or so pic's bottles for anyone that wants them - some with no labels...
-
By far the easiest way I've found to get the sticky mess off is with lighter fluid like zippo or the stuff in the yellow bottle (Ronsonol) . You put a couple drops on one corner lift that corner and hold the lable with one hand and drip some fluid with the other letting the weight of the bottle pull the label right off. Then use a little fluid on some paper towel to remove the rest of the glue. Or you could scrape it off then use some lighter fluid to remove the sticky glue that's left. Either way the lighter fluid works the best to take the sticky glue off. I've tried everything from alcohol to acetone even gas nothing seems to work as good as the lighter fluid.
:cheers:
-
Soak them in hot water with oxy-clean overnight - works great from what I remember
-
I used to cut an X in the label, and soak them in a strong "pink stuff" water bath overnight. you'll find the labels are mostly off in the morning. A lot of work...
-
Soak them in hot water with oxy-clean overnight - works great from what I remember
Well I just tried the oxy clean in a pail of hot water and sure enough the lable came of no problem. I'm gonna need to try the vinegar and pink stuff next. The lables come off regular beer bottles with just hot water and dish soap so when that didn't work I went straight for the solvents. This method takes a little longer but I prefer it to my last post using lighter fuild. Not that I intended on delabeling bottles any time soon since I'm building a kegerator but it's nice to know the best way of doing it. The lighter fluid is still great for cleaning sticky messes off things you can't soak or don't have time.
Great tip kyle.
:cheers:
-
Wouldn't use dish soap for anything related to beer. Nothing, not even my beer glasses.
Oxy is the way to go to de-label and cleaning activities. That's just my preference.
-
Wouldn't use dish soap for anything related to beer. Nothing, not even my beer glasses.
I’m curious to know your reasons? I never use the dish washer for my glasses and wash with soap and then rinse. Even my oldest glass looks brand new
-
I should probably say that not using dish soap is my preference.
- Many dish soaps are oil based. Oil and soap residue can affect the quality and appearance of your beer because they interfere with head retention, causing the beer foam to dissipate rapidly.
- Some soaps will counter-act with sanitizers, making them useless.
This is debatable. As stated above, it's a preference.
Organic or not organic, I'm sure most people who wash with with dish soap, rinse really well with hot water, and have no problems.
Many people use the dishwasher too - never had a problem with head retention and their glasses are spotless.
Some folks will say that it's the post soap rinse that really matters. Not the fact that a person uses soap.
-
I soak my bottles in very hot water, then peel the paper off. To get the glue off I rub extra virgin olive oil on the area and let it sit for about 30 minutes. After that the glue comes off fairly easily.