• Welcome to New Brunswick Craft Brewers Association.

Fermentis S-04. How quick is too quick?

Started by fakr, October 06, 2011, 07:56:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

fakr

it didn't look like my 1.084 OG IPA was fermenting at all for the first 24 hours, then over the next 24 hours the air lock bubbled like crazy, and then this evening stopped completely.  I took an SG from the spout and it's showing 1.040.

is this normal for this type of yeast?  

if fermentation stopped at 1.040, then it looks like I'm going to have to make a starter and pitch again as I don't want to drink beer that sweet.  I was expecting around 1.020 or so.
"If God had intended for us to drink beer, He would have given us stomachs."

Richard

S-04 is really fast - 3 days is normal, and I've seen less even with higher OG brews. Sounds like you're right on schedule.

My concern with your brew-day as described was that potentially the mash hadn't quite worked out. I would take a sample and taste it for sweetness, you may have ended up with a sizeable quantity of unfermentables in the wort. If it's heavy on maltotriose you may be stuck with what you got. I'd try rousing the yeast (give the carboy a damn good shaking) and see if anything picks up. It may just be that the yeast flocculated after its initial feeding frenzy. English yeast is extremely flocculant, and sometimes has issues with high OG beers without rousing.
Charter Member

Kegged: air.
Primary: air.
Bulk Aging: Silence of the Lambics (Pitched 13/05/2012).
Owed: JQ LSA x 1, Kyle Stout x 1 & IPA x 1.

fakr

Thanks Richard, I will rouse the yeast.  I will note that while taking a SG from my hydrometer tube, the wort was still producing CO2. it was forming a head on the surface and I could see CO2 rising...so maybe I'll wait the 3 days before jumping to conclusions.

by the way, I mashed this time around using a big bag that held 12lbs snuggly.  probably not the most ideal as the grain probably didn't have a chance to really swim around in the water.  I did the same procedure with sparge water, and let it soak for another 10 minutes before removing it.

That will be the last time using that technique.  I just didn't want to use my mash tun without getting the proper shank and fitting for my ball valve. didn't want to chance my mash tun leaking.
"If God had intended for us to drink beer, He would have given us stomachs."

Richard

If it's only two days I'd wait a week and rouse daily - that's a real high OG, and the weather is getting on the cold side. Might have just been a cold day caused the yeast to floc.
Charter Member

Kegged: air.
Primary: air.
Bulk Aging: Silence of the Lambics (Pitched 13/05/2012).
Owed: JQ LSA x 1, Kyle Stout x 1 & IPA x 1.

fakr

so a good shake daily for a week it is.

I think I'm going to try the Krausening technique in the secondary, to finish up fermentation and clean up the beer.  

I'm very excited about this beer and hope it turns out.
"If God had intended for us to drink beer, He would have given us stomachs."

sdixon

Yeah, I just used S-04 for the first time and thought something was wrong when fermentation all but stopped after 3 days. It was my small beer I just brewed OG 1.040, after the 3 days 1.014. Wracked into secondary, but it's not really working anymore. Tasted ok though :-)
"Good people drink good beer"
Hunter S. Thompson


On Tap]

Richard

Good job :)

FYI many of us here don't bother with secondary unless you're racking onto fruit or aging for more than a couple of weeks; even dry-hopping in primary seems to work just fine. Otherwise it's just another carboy to clean.
Charter Member

Kegged: air.
Primary: air.
Bulk Aging: Silence of the Lambics (Pitched 13/05/2012).
Owed: JQ LSA x 1, Kyle Stout x 1 & IPA x 1.