• Welcome to New Brunswick Craft Brewers Association.

Broken power adapter

Started by Chris Craig, February 21, 2013, 07:08:56 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Print
Go Down Pages1 2
User actions

Chris Craig

February 21, 2013, 07:08:56 PM
So, I went to use my pump today only to find out that my 12 power adapter was broken.  No pump means no beer.  

Does anybody have a 12V DC 1.25A adapter I can buy, or know where I can get one tomorrow?  I'd really like to brew this weekend.  I'm just about out of beer!!

chrismccull

#1
February 21, 2013, 07:29:44 PM
I have a multiple voltage adapter,but, the amperage is only 300 mA.

Chris Craig

#2
February 21, 2013, 07:34:46 PM
I'm a bit out of my depth. I'm not sure if it has to be the same.

chrismccull

#3
February 21, 2013, 07:46:14 PM
Doubt it would work, but, you are welcome to try it.

jdueck

#4
February 21, 2013, 08:30:40 PM
I have a 4A that you can borrow if you like.

Jon
Primary #1 - Empty
Primary #2 - Empty
Primary #3 - Empty
Primary #4 - Empty

Secondary #1- Wheat  (Tangerine and coriander)
Secondary #2 - Dry cider
Secondary #3 - Cream ale fermented with M27
Secondary #4 - Cream ale fermented with M07
Secondary #5 - Merlot

Richard

#5
February 21, 2013, 08:53:23 PM
the 300 milli won't work - the 4A will (assuming the connector is the same).
Charter Member

Kegged: air.
Primary: air.
Bulk Aging: Silence of the Lambics (Pitched 13/05/2012).
Owed: JQ LSA x 1, Kyle Stout x 1 & IPA x 1.

Chris Craig

#6
February 21, 2013, 08:58:46 PM
No connector.  I cut the end off and wired it into a switch.  It got damaged at the shit show at Colin's last month.  I found a replacement on eBay for < $3, but it'll likely take 3 weeks to get here.

Richard

#7
February 21, 2013, 08:59:58 PM
Kinda takes borrowing out of the picture unless it's a bench PSU :)
Charter Member

Kegged: air.
Primary: air.
Bulk Aging: Silence of the Lambics (Pitched 13/05/2012).
Owed: JQ LSA x 1, Kyle Stout x 1 & IPA x 1.

Richard

#8
February 21, 2013, 09:02:16 PM
Computer PSU would supply the necessary power, but I wouldn't recommend having one anywhere near a brew day :P
Charter Member

Kegged: air.
Primary: air.
Bulk Aging: Silence of the Lambics (Pitched 13/05/2012).
Owed: JQ LSA x 1, Kyle Stout x 1 & IPA x 1.

jdueck

#9
February 21, 2013, 09:11:58 PM
I went and checked out the PS, there is a 12V 1A, and  an old (1985) vintage PS that looks like it was removed from some old electronics 12V 3A, not a sealed unit.
Primary #1 - Empty
Primary #2 - Empty
Primary #3 - Empty
Primary #4 - Empty

Secondary #1- Wheat  (Tangerine and coriander)
Secondary #2 - Dry cider
Secondary #3 - Cream ale fermented with M27
Secondary #4 - Cream ale fermented with M07
Secondary #5 - Merlot

Chris Craig

#10
February 21, 2013, 09:19:14 PM
Hmmm.  So, is there a risk using a 3A PS when I was previously using the 1.15A PS that came with the pump?  The last thing I want to do is damage the greatbreweh pump and have to buy a chugger.  What a shame that would be.

DandyMason

#11
February 21, 2013, 09:35:07 PM
You can always borrow my great brew eh pump and order from ebay if that helps

Kyle

#12
February 21, 2013, 09:36:31 PM
you want to match the voltage, but as long as the amperage output of the plug is equal to or higher than the draw, you will be fine. The only current that will be drawn is dependent on the load, rather than the supply. Think of it this way, a standard household outlet is 15 amps, but to plug your cell phone charger in, you are only drawing a tiny fraction of that.
Charter Member

On Tap: DIPA, Vienna SMaSH, Imp Stout
Planned: IPA
Fermenting: --

Richard

#13
February 21, 2013, 10:02:48 PM
What Kyle said.
Charter Member

Kegged: air.
Primary: air.
Bulk Aging: Silence of the Lambics (Pitched 13/05/2012).
Owed: JQ LSA x 1, Kyle Stout x 1 & IPA x 1.

Chris Craig

#14
February 22, 2013, 06:40:20 AM
Makes sense.  It's been so long since I studied this stuff in school.  Thanks guys!
Print
Go Up Pages1 2
User actions