• Welcome to New Brunswick Craft Brewers Association.

Kijiji Ad

Started by chrismccull, May 29, 2012, 01:44:00 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

blisster

Give a man a beer and he'll waste an hour, teach him how to brew beer and he'll waste a lifetime.




jdueck

Primary #1 - Empty
Primary #2 - Empty
Primary #3 - Empty
Primary #4 - Empty

Secondary #1- Wheat  (Tangerine and coriander)
Secondary #2 - Dry cider
Secondary #3 - Cream ale fermented with M27
Secondary #4 - Cream ale fermented with M07
Secondary #5 - Merlot



jdueck

Primary #1 - Empty
Primary #2 - Empty
Primary #3 - Empty
Primary #4 - Empty

Secondary #1- Wheat  (Tangerine and coriander)
Secondary #2 - Dry cider
Secondary #3 - Cream ale fermented with M27
Secondary #4 - Cream ale fermented with M07
Secondary #5 - Merlot

blisster

Anyone going to Vermont soon who could pick this up for me?  :cheers:

http://burlington.craigslist.org/for/4453803241.html


Stand with (2) burners, gas Y and water filter $225.00
15 gallon Blichmann kettle with hop blocker $300.00
15 gallon Blichmann false bottom $45.00
March 809 pump with 3 piece ball valve $110.00
Ultraship 35 scale $20.00
(2) 5 gallon ball lock kegs $50.00 (each)
(3) transfer hoses with extra cam locks $30.00
(3) brewing books $5.00 each
Give a man a beer and he'll waste an hour, teach him how to brew beer and he'll waste a lifetime.

Two Wheeler

Jordan Harris
BIAB'er

blisster

Give a man a beer and he'll waste an hour, teach him how to brew beer and he'll waste a lifetime.

HopHead

Yup, it's me guys.
Richard


blisster

Now, that is a deal:

http://maine.craigslist.org/for/4502216539.html

SS single tier 3 burner propane brew stand with 3 polished 15.5 gallon sanke kegs, SS valves, connects, quick disconnects, dip tubes, bobby m sight tubes, thermometers on each, 50' 1/2" SS HERMES coil in the HLT, Jaybird false bottom in the MT, 2 SS chugger pumps (one stopped working one brewday and haven't pulled it off or apart to figure out why) different lengths silicon tubing with quick disconnects on them.

Shmidling malt mill set up, practically new electric motor (motor alone was near $200)
12 - Ball lock corny kegs, all hold pressure been using them regularly.
15 - Pinlock cornies, bought these from a brewery they all need a thorough cleaning and the O rings checked, changed, I have a couple hundred O rings for them too.
1 - 10 gallon ball lock corny, looks like new, missing the gas in fitting, has dip tube, Lid and liquid out fitting.
1 - 15.5 gallon sanke keg with spear removed, used it as a fermenter. (Thats over $1000 in kegs alone)
3 - 15 gallon food safe plastic containers the kind they use for maple syrup collection and such. Meaning to turn them into fermenters haven't got around to it yet.
5 - 6.5 gal bucket fermenters and lids
I have a bunch of food safe 5 gal buckets and lids too.
7 gallon CO2 tank with regulator and dual regulator splitter, allows you to put 4 cornys on the gas in the fridge.
Old used refidgerator, not pretty but works, has enough room for 4 corny's or 1 sanke. I used this to carb my kegs, also used it to Lager with.
1 distiller, made from a SS old fashioned fire extinguisher, copper tower, used this to recover the alcohol from a bad batch of beer, wine or cider to use for cleaning.
I'll throw in 2 propane tanks as well.
Lots of misc stuff, airlocks, beer hose, too much to list.

$3,000 firm
Give a man a beer and he'll waste an hour, teach him how to brew beer and he'll waste a lifetime.

Two Wheeler

Jordan Harris
BIAB'er