• Welcome to New Brunswick Craft Brewers Association.

Gelatin Technique

Started by JohnQ, May 06, 2011, 09:36:45 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

JohnQ

I've now read about the 50th way of using gelatin that I have found on the know-it-all-net, how about you with experience in using describe your process here...
I've seen everything from 1.5 grams to a tablespoon with boiling water on top, starting with cold water, pitching hot, pitching cold, in the keg first, only in the secondary.
Perhaps there's more of a consensus among us.
Charter Member
I'm on the 12 step program...
I'm on Step 1 - I've admitted I have a problem...and if you're reading this, so do you!

On Tap: 1. MT; 2. PartiGyle Barley Wine; 3. MT; 4. MT; 5. Obiwan Kanobe 6. Pollen Angels TM Base; 7. MT  8. MT
Visiting Taps:
Travelling: Vienna Pale @ RB's; NB55 @ Fakr's
Recent Visitors: CMC Graham Cracker Brown, Fakr's Warrior AGDTDiPA; Brew's SNPA; Brew's C^3, Fakr's Stout
In the BH's: 1. Empty 2. WW, STILL! 3. Empty
Aging: Lots and Lots of Mead for Samples

Richard

I use a packet of the stuff (I forget how big they are), mix it up per the package directions, and pitch it cold into the primary (note: you won't be re-using the yeast if you do this).
Charter Member

Kegged: air.
Primary: air.
Bulk Aging: Silence of the Lambics (Pitched 13/05/2012).
Owed: JQ LSA x 1, Kyle Stout x 1 & IPA x 1.

Richard

I found it tends to rip out a fair bit of the aroma on its way, so don't do this after dry-hopping or if you've got a particularly aromatic beer.
Charter Member

Kegged: air.
Primary: air.
Bulk Aging: Silence of the Lambics (Pitched 13/05/2012).
Owed: JQ LSA x 1, Kyle Stout x 1 & IPA x 1.