New Brunswick Craft Brewers Association

Uncategorized Boards => Welcome Forum => Topic started by: adebertin on February 06, 2018, 01:09:34 PM

Title: Hello from St. Andrews
Post by: adebertin on February 06, 2018, 01:09:34 PM: Happy to join the forum and see what other brewers in NB are up to. Could you make my username as adebertin ?

I'm from St. Stephen originally and moved back to St. Andrews for work. I started homebrewing last year in Guelph as there was a good brew shop in the city to buy supplies and equipment.

My setup is really cheap but it makes good beer.
I just started crushing my own grain and noticed a 5 to 10% increase in efficiency. I create 5 gallons of beer using BIAB all-grain batches in a 7 gallon kettle. I use a 1800 watt induction cooktop ($150) to heat up the kettle for mashing and boiling. It's a little slow to heat, (maybe 30 minutes to get to a boil) but faster and more even heat then a stovetop surface. Plus I can brew outside easily with an extension cord. It also allows me to keep the mash at proper temperatures as you can dial the wattage of kettle directly.

I then let the beer cool in a sealed plastic bucket overnight, I then transfer the beer into a glass carboy to get rid of the trub and ferment for ~2 weeks. I transfer to secondary as I fine it helps with clarity and then bottle into swing top bottles.

Preferred styles are German or Belgian in origin with the occasional IPA, bitter or stout. Latest brews that are bubbling are my take on Maibock, Vienna and Munich Dunkel lagers.

Cheers.
Title: Re: Hello from St. Andrews
Post by: Two Wheeler on February 06, 2018, 03:36:39 PM: Welcome Allan! :cheers:

How do you find the "no chill" method works?
Title: Re: Hello from St. Andrews
Post by: adebertin on February 06, 2018, 07:36:09 PM: I haven't had an issue with "no chill". I always start with a sanitized bucket and keep it sealed until I transfer the wort into a primary carboy the following day. The trub settles out during the no chill, so i can easily transfer beer to primary carboy for better clarity.
Title: Re: Hello from St. Andrews
Post by: mikegraham on February 06, 2018, 10:39:30 PM: Quote from: adebertin on February 06, 2018, 07:36:09 PM
I haven't had an issue with "no chill". I always start with a sanitized bucket and keep it sealed until I transfer the wort into a primary carboy the following day. The trub settles out during the no chill, so i can easily transfer beer to primary carboy for better clarity.

I like no chill i play with it from time to time. And welcome
Title: Re: Hello from St. Andrews
Post by: pliny on February 06, 2018, 11:18:30 PM: Welcome @adebertin (http://nbcba.org/forum/index.php?action=profile;u=2189) Charlotte County is some pretty country.
Title: Re: Hello from St. Andrews
Post by: Roger on February 07, 2018, 10:03:16 AM: Welcome! :cheers:
Title: Re: Hello from St. Andrews
Post by: feldmann on February 07, 2018, 11:53:32 AM: Welcome!

I've considered 'no chill' recently because I rarely have time on the weekends, so I was planning a brew in stages over a day or two. Its nice to hear 'no-chill' methods working for other people.
Title: Re: Hello from St. Andrews
Post by: robcoombs on February 07, 2018, 01:55:20 PM: Quote from: feldmann on February 07, 2018, 11:53:32 AM
Welcome!

I've considered 'no chill' recently because I rarely have time on the weekends, so I was planning a brew in stages over a day or two. Its nice to hear 'no-chill' methods working for other people.
Brulosophy did a post on this a while back. http://brulosophy.com/2015/11/09/cooling-the-wort-pt-1-no-chill-vs-quick-chill-exbeeriment-results/

I used to split my brew days when I was short on time. I'd mash and collect my wort, bring it up to 180F, take it off the heat, put the lid on and finish the boil the next day.

Sent from my SM-G935W8 using Tapatalk
Title: Re: Hello from St. Andrews
Post by: redroast on February 08, 2018, 09:43:31 PM: Welcome!

I am just getting into lagers myself. I have two Marzens on the go and was eyeing up a Maibock.

What are you using for temperature control? Myself, I use a really cold basement. lol.
Title: Re: Hello from St. Andrews
Post by: mikegraham on February 08, 2018, 10:35:14 PM: Quote from: redroast on February 08, 2018, 09:43:31 PM
Welcome!

I am just getting into lagers myself. I have two Marzens on the go and was eyeing up a Maibock.

What are you using for temperature control? Myself, I use a really cold basement. lol.
My last lager was in my basenment at about 14c than turned on a space heater and gradually increased the temp at the end for a few days. Best lager i have brewed yet
Title: Re: Hello from St. Andrews
Post by: Tim on February 09, 2018, 10:51:10 AM: I avoided brewing lagers for years but gave it a shot after reading http://brulosophy.com/2016/02/08/fermentation-temperature-pt-4-lager-yeast-saflager-3470-exbeeriment-results/ (http://brulosophy.com/2016/02/08/fermentation-temperature-pt-4-lager-yeast-saflager-3470-exbeeriment-results/). I was pretty happy with the results using W34/70 at 16-18C in the basement coldroom.
Title: Re: Hello from St. Andrews
Post by: redroast on February 09, 2018, 04:46:18 PM: Quote from: Tim on February 09, 2018, 10:51:10 AM
I avoided brewing lagers for years but gave it a shot after reading http://brulosophy.com/2016/02/08/fermentation-temperature-pt-4-lager-yeast-saflager-3470-exbeeriment-results/ (http://brulosophy.com/2016/02/08/fermentation-temperature-pt-4-lager-yeast-saflager-3470-exbeeriment-results/). I was pretty happy with the results using W34/70 at 16-18C in the basement coldroom.

I read that too; that's the exact reason I gave lagers a try! So far so good.