I guess i'm a little more patient..lol
I've found setting at 16 psi for 5-7 days is working pretty good.
Guess i could do some experimenting with higher pressures for shorter time.
I've found that about 30psi for about 48 hours works for me. After the 48 hours, I remove the gas disconnect, release the excess gas in the keg, set the pressure on the regulator at 10psi, reconnect the gas, pour off any junk that comes out of the line (from the previous keg, cloudiness, etc) and then drink.
Yes, it's 48 hours vs 1 hours with the blichmann.