Welcome, Guest. Please login or register.

Author Topic: Cleaning Kegs  (Read 6189 times)

Offline Jmac00

  • Junior Poster
  • **
  • Posts: 413
  • Liked:
  • Likes Given: 0
Re: Cleaning Kegs
« Reply #15 on: July 25, 2011, 10:56:47 PM »
For the larger posts you'll need a 7/8 or 22mm deep socket or wrench(box end/open end).
For the small posts, you'll need a 11/16 deep socket or wrench.

Its all personal preference, but i prefer the wrench.....minimal tools...and 12pt at the box end for the gas fittings. But its all preference...if you already have a socket set, then use it.

Offline fakr

  • Administrator
  • Forum Hero
  • ****
  • Posts: 1545
  • Liked:
  • Likes Given: 48
Re: Cleaning Kegs
« Reply #16 on: August 29, 2011, 05:52:45 PM »
Sorry for hashing up old posts, but for those using kegs I'd suggest you make a special tool called "the fakr double ended dongledo":

-2 feet of pressure or beer line
-1 ball lock gas fitting
-1 ball lock liquid fitting
-a couple of hose clamps.

Put a fitting on either end of the 2 foot line.  Fill your first keg with a gallon or two of star san solution, cap, and pressurize to 10+ psi.  Shake well, let sit a few minutes, then attach the liquid fitting to the out valve, and the gas fitting to the next keg.  The pressure from the first keg will push all the solution through to the second keg. (keep the pressure release valve open on the second keg).  When the first is empty, you can open and rinse with water.  Pressurize the second keg and repeat the instructions.

You can make your star san solution a bit stronger if you'd like, and you can make a couple of gallons of solution last through several keg cleanings in a row.

When you're on your last keg, hook it up to your tap, put a bucket under your tap and open it wide....this will also clean your beer line and tap.

All this without getting your hands wet.  Well, except for when you open the kegs and rinse.

Note:  pre rinse kegs with water before doing all this.
"If God had intended for us to drink beer, He would have given us stomachs."

Offline Richard

  • Charter Member
  • Forum Ninja
  • *****
  • Posts: 4618
  • Liked:
  • Likes Given: 67
Re: Cleaning Kegs
« Reply #17 on: August 29, 2011, 06:12:57 PM »
Cunning. I'd been doing something similar, but not as a closed-system: I have picnic taps on mine, so I just pump it out of the first and into the open lid of the second by jamming the tap open and dumping it in the second keg.
Charter Member

Kegged: air.
Primary: air.
Bulk Aging: Silence of the Lambics (Pitched 13/05/2012).
Owed: JQ LSA x 1, Kyle Stout x 1 & IPA x 1.