• Welcome to New Brunswick Craft Brewers Association.

Stock Pots on Sale

Started by chrismccull, February 01, 2013, 03:52:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

chrismccull

I went to Davidson's Restaurant Equipment to look for a 15 gal. heavy duty stock pot to convert into a brew kettle and found and aluminum one that is on for $82.49 from $153.  The quality looked good to me, and the price was excellent.  They also have the 20 gal. version on for $95.79, I am not sure on the regular price, but, it would obviously be more than $153.  

Check them out if you are in the market.

fakr

I had an aluminium pot when I started out...the pot kept going white and pasty on me....I'd stick with SS.
"If God had intended for us to drink beer, He would have given us stomachs."

chrismccull

If I don't like it, I can use it for an HLT, no worries.

fakr

I used mine as a hot water tank.  Maybe if you drain all the water and dry it out each time it would be fine.
"If God had intended for us to drink beer, He would have given us stomachs."

HappyHax0r

If you do a boil in it with hard water before using it the first time it should get an aluminum oxide layer on it (dark gray) and then it should be fine from then on out. I use aluminum for my boilpot and my beers turn out fine :).
Primary: #1, 2, 3, 4 (Air, Air, Air, Air)
Kegs     #1, 2, 3, 4 (C02, C02, C02, C02)

Richard

The white crap is fine - just make sure you clean off any excess with a cloth (no soap, no abrasives, just hot water) and dry the thing thoroughly after use.
Charter Member

Kegged: air.
Primary: air.
Bulk Aging: Silence of the Lambics (Pitched 13/05/2012).
Owed: JQ LSA x 1, Kyle Stout x 1 & IPA x 1.