• Welcome to New Brunswick Craft Brewers Association.

Kegerator Gas Tubing

Started by blisster, September 02, 2013, 06:41:10 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

blisster

Well I finally got around to getting a kegerator setup... I went with a 2 tap passthrough kit with corny ball lock kegs and am hoping to find an old fridge to install it in this week.

Where is the best place to find tubing and to get CO2 tanks filled in the Fredericton area?
I'm hoping to find some red gas line tube...
Give a man a beer and he'll waste an hour, teach him how to brew beer and he'll waste a lifetime.

Chris Craig

Ontariobeerkegs.com is a great place for kegging equipment, but I've used 1/4" hi pressure water hose from Kent before.  You need to heat the ends of the tubing in boiling water to make them pliable enough to fit over the barbs, but it works.

I get my CO2 at Atlantic Fire & Safety.  They fill while you wait.

Jake

I've been using the thick walled 3/16th beer line. I force carb at 30 psi with it with no problems. I've come to hate the red stuff bc I can't see if beer shoots up my gas line, which has happened to me in the past
President of the NBCBA

brew

So there is a thread in the Member Orders forum where people have been tracking their CO2 fills. There are a few:

Atlantic Fire and Safety - more expensive but convenient
Air Liquide - lease bottles - convenient as you just exchange tanks when you need a fill
Glenn Kennedy - Lincoln - if you call first you can take your tank to him and fill while you wait, or sometimes he will pickup / drop off for you

Here's the thread you can check out the prices people have paid:
http://nbcba.org/forum/member-orders/co2-logs-please-add-and-edit-as-required/

NBCBA Treasurer
Planned: Drink beer later, Primary: Drink beer soon, Secondary: Drink beer shortly, Kegged: Drinking beer now

JohnQ

There's also Praxair, they swap bottles on a kind of rental basis, not sure how it's working nowadays, they just traded my old bottle in even though it wasn't theirs, and I've used theirs as mine since.

JQ

Charter Member
I'm on the 12 step program...
I'm on Step 1 - I've admitted I have a problem...and if you're reading this, so do you!

On Tap: 1. MT; 2. PartiGyle Barley Wine; 3. MT; 4. MT; 5. Obiwan Kanobe 6. Pollen Angels TM Base; 7. MT  8. MT
Visiting Taps:
Travelling: Vienna Pale @ RB's; NB55 @ Fakr's
Recent Visitors: CMC Graham Cracker Brown, Fakr's Warrior AGDTDiPA; Brew's SNPA; Brew's C^3, Fakr's Stout
In the BH's: 1. Empty 2. WW, STILL! 3. Empty
Aging: Lots and Lots of Mead for Samples

blisster

Thanks all... I stopped by Atlantic Fire & Safety on Wilsey road and they need to do a Hydro test on the tank.
$35 for testing and $25 for filling the 5lb tank.

Give a man a beer and he'll waste an hour, teach him how to brew beer and he'll waste a lifetime.

fakr

$25 fill is pretty good. The hydro test is good for 5 years i believe.
"If God had intended for us to drink beer, He would have given us stomachs."

Al-Loves-Wine

Yeah 25 bucks is a sweet deal, praxair here in Woody charges me 38 I believe and I own the bottle.

JohnQ

I think the best deal in town for a 5#er is from Glen Kennedy,
Club members only pay $2.40/lb plus $6 per fill, that works out to $18+tax.
You have to tell him you're a club member though, normally it's about $10 more.

JQ
Charter Member
I'm on the 12 step program...
I'm on Step 1 - I've admitted I have a problem...and if you're reading this, so do you!

On Tap: 1. MT; 2. PartiGyle Barley Wine; 3. MT; 4. MT; 5. Obiwan Kanobe 6. Pollen Angels TM Base; 7. MT  8. MT
Visiting Taps:
Travelling: Vienna Pale @ RB's; NB55 @ Fakr's
Recent Visitors: CMC Graham Cracker Brown, Fakr's Warrior AGDTDiPA; Brew's SNPA; Brew's C^3, Fakr's Stout
In the BH's: 1. Empty 2. WW, STILL! 3. Empty
Aging: Lots and Lots of Mead for Samples

pliny

Got tank filled by Kennedy. Good service. $22.60 for a 5lb tank.