New Brunswick Craft Brewers Association

Uncategorized Boards => General => Topic started by: Chris Craig on February 21, 2013, 07:08:56 PM

Title: Broken power adapter
Post by: Chris Craig on February 21, 2013, 07:08:56 PM
So, I went to use my pump today only to find out that my 12 power adapter was broken.  No pump means no beer.  

Does anybody have a 12V DC 1.25A adapter I can buy, or know where I can get one tomorrow?  I'd really like to brew this weekend.  I'm just about out of beer!!
Title: Re: Broken power adapter
Post by: chrismccull on February 21, 2013, 07:29:44 PM
I have a multiple voltage adapter,but, the amperage is only 300 mA.
Title: Re: Broken power adapter
Post by: Chris Craig on February 21, 2013, 07:34:46 PM
I'm a bit out of my depth. I'm not sure if it has to be the same.
Title: Re: Broken power adapter
Post by: chrismccull on February 21, 2013, 07:46:14 PM
Doubt it would work, but, you are welcome to try it.
Title: Re: Broken power adapter
Post by: jdueck on February 21, 2013, 08:30:40 PM
I have a 4A that you can borrow if you like.

Jon
Title: Re: Broken power adapter
Post by: Richard on February 21, 2013, 08:53:23 PM
the 300 milli won't work - the 4A will (assuming the connector is the same).
Title: Re: Broken power adapter
Post by: Chris Craig on February 21, 2013, 08:58:46 PM
No connector.  I cut the end off and wired it into a switch.  It got damaged at the shit show at Colin's last month.  I found a replacement on eBay for < $3, but it'll likely take 3 weeks to get here.
Title: Re: Broken power adapter
Post by: Richard on February 21, 2013, 08:59:58 PM
Kinda takes borrowing out of the picture unless it's a bench PSU :)
Title: Re: Broken power adapter
Post by: Richard on February 21, 2013, 09:02:16 PM
Computer PSU would supply the necessary power, but I wouldn't recommend having one anywhere near a brew day :P
Title: Re: Broken power adapter
Post by: jdueck on February 21, 2013, 09:11:58 PM
I went and checked out the PS, there is a 12V 1A, and  an old (1985) vintage PS that looks like it was removed from some old electronics 12V 3A, not a sealed unit.
Title: Re: Broken power adapter
Post by: Chris Craig on February 21, 2013, 09:19:14 PM
Hmmm.  So, is there a risk using a 3A PS when I was previously using the 1.15A PS that came with the pump?  The last thing I want to do is damage the greatbreweh pump and have to buy a chugger.  What a shame that would be.
Title: Re: Broken power adapter
Post by: DandyMason on February 21, 2013, 09:35:07 PM
You can always borrow my great brew eh pump and order from ebay if that helps
Title: Re: Broken power adapter
Post by: Kyle on February 21, 2013, 09:36:31 PM
you want to match the voltage, but as long as the amperage output of the plug is equal to or higher than the draw, you will be fine. The only current that will be drawn is dependent on the load, rather than the supply. Think of it this way, a standard household outlet is 15 amps, but to plug your cell phone charger in, you are only drawing a tiny fraction of that.
Title: Re: Broken power adapter
Post by: Richard on February 21, 2013, 10:02:48 PM
What Kyle said.
Title: Re: Broken power adapter
Post by: Chris Craig on February 22, 2013, 06:40:20 AM
Makes sense.  It's been so long since I studied this stuff in school.  Thanks guys!
Title: Re: Broken power adapter
Post by: HappyHax0r on February 23, 2013, 04:11:39 PM
Compy PSU's are switched and notoriously noisy. That's not saying you can't run a pump off one, but if it doesn't have decent rail-to-rail performance you're gonna harm (and possibly blow) the PSU. Just a heads up.
Title: Re: Broken power adapter
Post by: Chris Craig on February 23, 2013, 07:09:14 PM
I had thought of that HH.  Ruled it out quickly though. I ordered a PS from eBay for $3.  I'll just have to live without the pump in the meantime.  I've got carmstrong's immersion chiller.  That'll work for now.  

I was really close to ordering the chugger from hopdawgs the other day though.  Really close.
Title: Re: Broken power adapter
Post by: DandyMason on February 24, 2013, 10:21:32 AM
if youre thinking about a chugger, pro flow dynamics has a good price

http://store.proflowdynamics.com/module ... C12074.cfm (http://store.proflowdynamics.com/modules/store/Camlock-Couplings-for-Homebrewers-_C12074.cfm)
Title: Re: Broken power adapter
Post by: Chris Craig on February 24, 2013, 11:17:07 AM
That's an awesome price.  Beats Hopdawgs.ca even with shipping from the US!
Title: Re: Broken power adapter
Post by: fakr on February 24, 2013, 03:49:29 PM
Chris, you don't have any orphaned power adapters kicking around?  I must have 7 or 8 kicking around from old modem and other broken gear.  As long as its 12v output, give or take a couple of volts, and 1A, you can just splice it on.
Title: Re: Broken power adapter
Post by: Chris Craig on February 24, 2013, 04:54:35 PM
Unfortunately, I don't have one that fits the bill.  I even tried Digital World here.  No luck, and they had hundreds in a bin out back to look through.
Title: Re: Broken power adapter
Post by: Chris Craig on February 24, 2013, 08:35:35 PM
You can find anything on the internet.  

http://www.12vadapters.com/ (http://www.12vadapters.com/)

There's probably a site that sells only blue M&Ms too :)
Title: Re: Broken power adapter
Post by: Richard on February 24, 2013, 08:46:09 PM
Yup: Amazon :P

http://www.amazon.com/Ms-Blue-Milk-Choc ... B0080JIM7Q (http://www.amazon.com/Ms-Blue-Milk-Chocolate-Candy/dp/B0080JIM7Q)
Title: Re: Broken power adapter
Post by: Chris Craig on February 24, 2013, 08:54:33 PM
To quote the great Andrew "Dice" Clay "Un-fucking-believable!"
Title: Re: Broken power adapter
Post by: Chris Craig on March 11, 2013, 09:31:27 PM
Finally got another adapter by mail.  All fixed up now.  Time to think about another brew!
Title: Re: Broken power adapter
Post by: Chris Craig on March 13, 2013, 07:10:01 PM
Just getting around to cleaning my pump and chiller. It never got cleaned from my last brew day in January. Recirculating boiling water for half an hour ought to help.
Title: Re: Broken power adapter
Post by: Chris Craig on September 29, 2013, 11:36:50 AM
Fucking power supply crapped out on me again.  Luckily it happened just after I finished brewing.  I just ordered a chugger. Not dealing with this shit anymore.
Title: Re: Broken power adapter
Post by: fakr on September 30, 2013, 09:45:47 AM
I'll take your little pump if you're not going to use it :)  I have a ton of spare power supplies and could use a spare pump!
Title: Re: Broken power adapter
Post by: Chris Craig on September 30, 2013, 10:04:43 AM
I'll take your little pump if you're not going to use it :)  I have a ton of spare power supplies and could use a spare pump!

That's very generous of you fakr.  I think I'm going to hang on to it for a bit though.  Who know, I may one day resurrect it.
Title: Re: Broken power adapter
Post by: fakr on September 30, 2013, 10:18:58 AM
lol!  thought I'd try!