New Brunswick Craft Brewers Association

Brewing => Equipment => Topic started by: Kyle on April 08, 2016, 10:50:09 PM

Title: Veneer for Kegerator?
Post by: Kyle on April 08, 2016, 10:50:09 PM

I got a good-sized keezer and am thinking of making it look less fugly. Anyone used anything like this for such purposes?

https://www.homedepot.ca/en/home/p.sheet-veneer-24-inch-x-99-inch-oak.1000106588.html#

probably frame it in with something like this:

https://www.homedepot.ca/en/home/p.1x2x8-millstead-spf-sdry.1000100184.html

It looks quick and easy.

Title: Re: Veneer for Kegerator?
Post by: shazapple on April 09, 2016, 05:30:25 PM

If you have a table saw I'd run a groove down the center to fit the veneer into.

Just be sure to leave an airspace between the veneer and the side of the freezer as the condenser coils are right behind the metal skin