Welcome, Guest. Please login or register.

Author Topic: First brew with new hop basket  (Read 6149 times)

Offline Waterlogged

  • NBCBA
  • Senior Poster
  • ***
  • Posts: 516
  • Reid
  • Liked:
  • Likes Given: 430
First brew with new hop basket
« on: January 14, 2014, 12:06:54 PM »
JonnyB and I brewed a big batch of Pic Best Bitter clone on Sunday.  It was the first brew using a hop basket JonnyB purchased online in US.  It worked exceptionally well.  It held all the hops needed which was about 2 oz of leaf and 6 oz  pellet hops.  The picture shows a lot of hops at the surface but once it boilded a minute or two and a few good stirrs, it dissapear to the bottom.  The mesh is a beleive 300 microns so very little trub at the bottom of the pot.  I am sure we were able to get an extra coupe of litre of beer into the carboys at the end.
Fermenting: Air
On Tap: Hoppy Porter
Bottled:  Air

Offline pliny

  • NBCBA
  • Senior Poster
  • ***
  • Posts: 799
  • Liked:
  • Likes Given: 250
Re: First brew with new hop basket
« Reply #1 on: January 14, 2014, 12:36:51 PM »
Looks great!

Offline blisster

  • Executive
  • Senior Poster
  • ***
  • Posts: 848
  • Got Hops?
  • Liked:
  • Likes Given: 484
Re: First brew with new hop basket
« Reply #2 on: January 14, 2014, 12:37:18 PM »
Looks awesome Reid...

Where did he purchase if from?  I just looked on ebay and they are about $75 shipped (to the US)...
Give a man a beer and he'll waste an hour, teach him how to brew beer and he'll waste a lifetime.

Offline Waterlogged

  • NBCBA
  • Senior Poster
  • ***
  • Posts: 516
  • Reid
  • Liked:
  • Likes Given: 430
Re: First brew with new hop basket
« Reply #3 on: January 14, 2014, 12:46:32 PM »
He got them at http://arborfab.com/ocart/index.php?route=common/home and they do go for about $75.  It would be nice if we could find a machiniest who could make these.  Pretty easy if you know how to weld and can get some stainless stell mesh.  We also got a carboy and a keg dry hop basket.
Fermenting: Air
On Tap: Hoppy Porter
Bottled:  Air

Offline blisster

  • Executive
  • Senior Poster
  • ***
  • Posts: 848
  • Got Hops?
  • Liked:
  • Likes Given: 484
Re: First brew with new hop basket
« Reply #4 on: January 14, 2014, 03:16:03 PM »
Thanks.. I just ordered their 4x10 hop basket and carboy dry hopper combo  :cheers:
Give a man a beer and he'll waste an hour, teach him how to brew beer and he'll waste a lifetime.

Offline fakr

  • Administrator
  • Forum Hero
  • ****
  • Posts: 1545
  • Liked:
  • Likes Given: 48
Re: First brew with new hop basket
« Reply #5 on: January 14, 2014, 04:02:45 PM »
Very cool, could definitely use one of those.
"If God had intended for us to drink beer, He would have given us stomachs."

Offline Roger

  • Vice President
  • Executive
  • Forum Hero
  • ****
  • Posts: 1607
  • Liked:
  • Likes Given: 1409
Re: First brew with new hop basket
« Reply #6 on: January 15, 2014, 08:44:17 PM »
That's a great little gadget. I'd like to build one like this.

Offline Chris Craig

  • Charter Member
  • Charter Member
  • Forum Ninja
  • *****
  • Posts: 3189
    • Google+
  • Liked:
  • Likes Given: 252
Re: First brew with new hop basket
« Reply #7 on: January 15, 2014, 09:17:33 PM »
I used to use a hop sock, but I found decreased hops utilization.  I bet if you recirculated into the center of one of these during the boil, you'd get past that limitation.

If you really are going to build one, perhaps you'd be willing to me one too :)

Offline DandyMason

  • Club Technician
  • CTBM
  • Forum Hero
  • *****
  • Posts: 1018
  • Liked:
  • Likes Given: 340
Re: First brew with new hop basket
« Reply #8 on: January 16, 2014, 07:51:27 AM »
I was in touch with these guys too a while back but I didnt end up getting one. I might be in need of one in the near future though.

http://nbcba.org/forum/equipment/arbor-fab-hops-screen/msg20426/#msg20426

Offline Waterlogged

  • NBCBA
  • Senior Poster
  • ***
  • Posts: 516
  • Reid
  • Liked:
  • Likes Given: 430
Re: First brew with new hop basket
« Reply #9 on: January 16, 2014, 08:45:36 AM »
I used to use a hop sock, but I found decreased hops utilization.

We stopped using hop socks as well but mostly because we would forget to clean them and they would get a bit moldy.  Unlike the socks, the hops are free to circulate within the basket instead of being balled up tightly.  The beer just finsihed it primary so I hope to have it kegged by next weekend.  Should be ready in time for the next meeting.

Fermenting: Air
On Tap: Hoppy Porter
Bottled:  Air

Offline brew

  • Treasurer
  • Administrator
  • Forum Ninja
  • *****
  • Posts: 3154
  • Mild mannered suburbian
    • Google Plus
  • Liked:
  • Likes Given: 652
Re: First brew with new hop basket
« Reply #10 on: January 16, 2014, 10:33:04 AM »
Interesting - I originally started using a home made hop sock as well. Basically a 5G paint strainer bag strapped to a 6" PVC coupler suspended over the kettle. It worked great and was super cheap, but again, hop utilization becomes a factor. The hops did tend to bounce around in the bag, but I wonder if one of the items here would better encourage the hops to float around more increasing the hop utilization? Might be another alternative to helping me get better recirc through my CFC... Waterlogged I'd be interested to hear if you notice any difference...
NBCBA Treasurer
Planned: Drink beer later, Primary: Drink beer soon, Secondary: Drink beer shortly, Kegged: Drinking beer now

Offline Chris Craig

  • Charter Member
  • Charter Member
  • Forum Ninja
  • *****
  • Posts: 3189
    • Google+
  • Liked:
  • Likes Given: 252
Re: First brew with new hop basket
« Reply #11 on: January 16, 2014, 10:56:48 AM »
What we need is a giant version of this.  One that takes up almost the whole of the inside of the kettle :)

Offline Waterlogged

  • NBCBA
  • Senior Poster
  • ***
  • Posts: 516
  • Reid
  • Liked:
  • Likes Given: 430
Re: First brew with new hop basket
« Reply #12 on: January 16, 2014, 12:12:21 PM »
Once we get out chugger pump set up, recirculating the wort into the top of the basket is definitly going to be tried.
Fermenting: Air
On Tap: Hoppy Porter
Bottled:  Air

Offline Chris Craig

  • Charter Member
  • Charter Member
  • Forum Ninja
  • *****
  • Posts: 3189
    • Google+
  • Liked:
  • Likes Given: 252
Re: First brew with new hop basket
« Reply #13 on: March 30, 2014, 12:58:10 PM »
This guy had arborfab build a custom filter that would allow him to put his immersion chiller in the kettle.  I don't see it listed on their site, so it's probably a special order thing.

https://www.youtube.com/watch?v=57HzRN8v-4I

Offline Waterlogged

  • NBCBA
  • Senior Poster
  • ***
  • Posts: 516
  • Reid
  • Liked:
  • Likes Given: 430
Re: First brew with new hop basket
« Reply #14 on: April 05, 2014, 11:54:07 AM »
Seems like it would have to be custom made.  Very very cool.
Fermenting: Air
On Tap: Hoppy Porter
Bottled:  Air