New Brunswick Craft Brewers Association
Marketplace => Classifieds => Topic started by: lmo506 on January 21, 2016, 06:48:54 PM
-
I have a motor and pwr supply that I don't use. I don't remember what i paid. I'd ask $75 for both. I'm sure somebody will let me know if i'm off base with the price. Also 2 buners with stands and reg with hoses 100 $ for both. never used. paid 80 usd each.
-
@lmo506 (http://nbcba.org/forum/index.php?action=profile;u=1810) what's the HP and RPM's on the motor?
Thanks
-
Roger. I don't rember the specs but someone on here posted the same items a year or more ago to pwr their grain mill and i sourced the same thing out. I use a 1 " drill to pwr mine and never had time or effort to rig this up. I let mitch bigger at Railcar have it for ... geez a year or more and he never rigged it up either. If you want to "try before you buy" i can deliver it some time
-
I'm not planning to build a grain mill. I just like having DC motors on hand for other projects and experiments.
Let me know if you happen to find the spec's.
:cheers:
-
Specs on these motors as per ebay adds:
0.2 HP APROX (150 WATTS)
Uses 12V DC
RPM on these is around 190-200 so the mill shaft can be connected directly to the motor (unlike most standard AC motors that need a large pulley/belt to reduce the 1725 rpm). Also, because this is a DC motor, connecting it to a simple polarity reversing switch should give you a reverse to help with any freerolling.
Assuming it has enough torque to mill grains with most crushers (it should), that is the motor I would use if I were to build another electric grain mill:
http://nbcba.org/forum/equipment/electric-grain-mill/msg36113/#msg36113 (http://nbcba.org/forum/equipment/electric-grain-mill/msg36113/#msg36113)
-
I'll take the motor and power supply... are you down to Fredericton much?
-
Brew, I'm going up to Florenceville tomorrow, If late afternoon works for @lmo506 (http://nbcba.org/forum/index.php?action=profile;u=1810) I could pick it up on my way through?
-
Cool - I could EMT the cash? I'd owe u a beer as well blister!
-
Sorry guys . I've been tapping trees and no internet out there. The best way to contact me this time of year is call 376 8277. In the evening. My nephew ian will b in Fred next week